VGA Video 4 Port Splitter

Description:
The Video Splitter is a signal booster and splitter that is used to take video input from a single source and direct it to four video outputs for monitors using analog signals. The signal boost obtained by using this splitter allows you to not only split the signal but to extend the distance so that you can send the signal to about 215 feet away. This is no small feat, your average VGA card, over a standard VGA cable, sends a clear VGA signal approximately 25 feet. Dividing this between other displays reduces the video quality. This is why IOGEAR's video splitters are the best choice for allowing you to carry and split the video signal to more that one display with the same quality as the original signal.

These units have a bandwidth of 250MHz (which is 250 million cycles per second) and that is 40 times greater than a simple TV signal. The high bandwidth allows for the transmission of large amounts of information at a very high rate of speed, thus allowing for the use of high resolution settings upwards of 1920 x 1440 in 24 or 32 bit true color mode.

Features:
- Ultra high 250 MHz bandwidth
- Superior video quality; maintains highest signal strength in all applications up to 1920 x 1440
- Amplifies video signals increasing transmission distance up to 215 feet
- Supports up to 4 VGA monitors
- Daisy chainable; allows you to expand your video splitter set-up beyond 4 displays
- Hassle free, no software to install, instant installation and use.
- Hot plug capability, hot swappable, Plug-N-Play
- Compact design for easy placement
- All metal housing
- Supports DDC, DDC2, DDC2B at Port 1.

(For 10.4"+ Monitors 12V power supply may be needed).
Includes Belkin 6ft Expandview Series cable and custom power harness.

$119.99