DC/DC Converter 12V 25W

12V Regulated DC-DC power supply (converter) for LCDs and Accessories only.

Looking to use a 12V LCD and not sure if it’s going to work in a car environment, where voltage goes up and down from 9V to 14.5V? Need to power other 12V accessories? Look no further. These high quality DC-DC converters will do the trick. Rated at 25WT (DC-DC-25) and 50WT (DC-DC-50), they can handle multiple displays, each capable of powering up to 2 and 4 units respectfully. Wide input voltage from 9.2V to 18V allows full performance regardless of car running on low battery power or with engine on.

Although Xenarc 700/800 series LCDs are designed to work in varying voltage environment (11V-24V), they are susceptible to normal power line noise, which results in picture distortion. Such distortion can be easily eliminated with the use of a DC-DC power converter. Also, because DC-DC converters have fully isolated output, they get rid of grounding loops that may be created through monitor power and video cables. High-efficiency, small and quiet, they are a healthy addition to any LCD setup. *

All Xenarc monitors over 10” must be used with a 12V DC-DC power regulator / converter.

Features:
- 2:1 input range
- High reliability circuitry
- Wide working temperature range
- Built in EMI filter, low output ripple and noise
- Short circuit protection
- Overload and over voltage protection
- 100% full load burn in test
- ISO-9001 certified manufacturer

Specifications:
- Input 9.2~18 volts
- Output 12 volts – 2.1 amps
- Ripple and Noise < 120mV P -P
- Efficiency 72%

*LCD power requirements must be within power converter’s specifications.
 

$59.99